Quick Frame 175

for supporting cable tray, pipework systems and ductwork runs


The Quick Frame is designed with simplicity in mind. It's built to accommodate standard 1/2" threaded rod, or 1-5/8" strut off the shelf. Installers can customize their required support on site. This allows for the most flexible solutions and ease of setup. The non-penetrative design spreads out the weight load, keeping the roofing membrane safe and decking/insulation below free of damage. For installations requiring seismic bracing or extreme wind loading, the EcoFoot Roof Lock can be used to secure the base safely to the rooftop while satisfying requirements and producing a safe, secure water-tight seal to avoid roof leaks.

specification reference:

Product to be supported on EcoFoot Quick Frame support kits, Designed to accept 1-5/8" x 1-5/8" strut, complete with 17 1/2" x 17 1/2" non-penetrative UV stabilized bases. Product is North American engineered and manufactured from local raw materials in an eco-friendly method, minimizing waste and environmental impact. EcoFoot Quick Frame to rest on North American manufactured UV stabilized recycled pre-polymer bound rubber mats. Quick Frame supplied with galvanized finish pre-formed brackets and fixings of mild steel with hot dip galvanized finish. Quick Frame is non-penetrative and is designed to avoid roof membrane penetration.

recommended rooftop loading (per base):

300 lbs = 1 PSI
600 lbs = 2 PSI

* See consultant for acceptable PSI roof load

each kit includes:

  • (2) Injection Moulded Feet
  • (2) Anti-Vibration Mats
  • (2) Strut Base Caps*
  • (2) 90° Strut Brackets*
  • (4) Spring Nuts
  • (4) 1/2" Bolts

*Strut not included